Blackbody - DCN 1000
LOW TEMPERATURE EXTENDED AREA BLACKBODY - DCN 1000
Low-temperature Blackbody with the highest precision
The air-cooled Blackbody DCN1000N/H series and the fluid-cooled DCN1000W/L series are extended area blackbodies, with high thermal uniformity, stability and emissivity, for absolute temperatures ranging from –40°C to +150 °C.
They consist of an emissive head of various sizes whose temperature is accurately controlled via a 2U electronic unit through an ergonomic interface. The temperature of the high emissive surface is stabilised within 0.5mk at temperatures above and below ambient temperature.
Just as any other HGH blackbody, the DCN1000N/H and the Blackbody DCN1000W/L series are provided with a radiometric certificate of calibration demonstrating the reliability of this IR reference source for two years
Differential and absolute operation modes
Blackbody DCN 1000 - Key features
- Extended areas up to 300 mm x 300 mm
- Compact emissive head
- Differential and absolute modes operation
- Real time display of temperature data
- Intuitive interface
- The highest stability: < 0.5mk
- Built-in test equipment (BITE)
Blackbody DCN 1000 - Main benefits
- High thermal uniformity and emissivity
- Uniformity map provided with each Blackbody
- Silent operation
- LabVIEW drivers for all communication interfaces
- Anti-condensation and frost system
- Driven by Infratest – LT control software
- Control through coloured touchscreen panel
- Radiometric calibration over multiple bandwidths
- Remote control via Ethernet link, RS232, IEEE488
Download DCN1000 N/H BrochureBlackbody features
Targets can be added, as well as the INFRATEST software, thanks to which a wide range of tests can be automated: NETD, temporal noise, fixed pattern noise, MTF, FoV, distortion, spatial resolution, MRTD, TOD, etc.
Integrated Test with Labview Driver
HGH provides a full-featured LabVIEW driver for its family of blackbodies, compatible with LabVIEW 2019 or higher and for all available communication links Ethernet, RS232 and IEEE.
The supply includes all the required VIs directly available from the LabVIEW menu. These functions allow the operator to send a temperature setpoint, read the current temperature, check the stabilization status and many other functions.
The supply also includes an example program built with all the available VIs.
Thanks to this driver, all HGH’s blackbodies are fully controllable and can be integrated into complex test benches running automatic infrared characterization routines.
